- Amps
- Instruments
- Pro Audio
- Accessories
- Support
- About
$499.99 USD
PVXp series loudspeakers combine big power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance.
The PVXp 10 Bluetooth features a reliable bi-amped power section that provides a total of 520 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX10 compression driver with a 1 inch titanium diaphragm on a 100 degree horizontal x 60 degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator that can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector.
| Frequency Range, 1 meter on-axis, swept-sine in ½ Space environment | 52 Hz to 20 kHz |
|---|---|
| Frequency Response, 1 meter on-axis, swept-sine in anechoic environment | 65 Hz to 20 kHz (±3 dB) |
| Usable Low Frequency limit (-10 dB point anechoic) | 54 Hz |
| Nominal sensitivity (1W @1M, swept sine input in anechoic environment) | 96 dB (average) |
| Maximum Sound Pressure Level (1 meter) | 123 dB SPL peak with music |
| Radiation Angle measured at -6 dB point of polar response | Nominal: 100 degrees horizontal X 60 degrees vertical |
| Transducer Complement | Heavy-duty 10” woofer with 2 3/8” voice coil & 50 oz. magnet |
| Electroacoustic crossover frequency | 2,000 Hz |
| Crossover type | Advanced DSP based filter also providing driver EQ, level matching, bass boost, limiting, compression and subsonic filtering. |
| Crossover Slopes | Nominally 24 dB/octave (4th order) low pass, 24dB/octave (fourth order) high pass, both with driver EQ incorporated. |
| Input Connections (Each, Channels 1 and 2) | One combo female XLR and 1/4" phone jack providing balanced line-level operation. Mic/Line switch provides extra gain for microphone use. |
| Input Connections (Channel 3) | AUX is a 1/8" phone type jack. Channel 3 is nominally the Bluetooth® signal source channel. |
| Output Connection | One male XLR jack. This jack is intended for the use of linking multiple PVX™p 10‘s in a line or to provide a feed to a powered subwoofer, or other electronics that needs to receive a full range version of the input signal. |
| Enclosure Materials & Finish | Black injection-molded plastic with textured surface, black powder-coated perforated grilles. |
| Mounting provisions | Unit has two sets of two M8 inserts, one pair on the top, and one pair on the bottom. |
| Shipping Weight | 15.5 kg |
| Shipping Dimensions | 22.441 × 15.945 × 14.37 in |
If you have questions concerning product operation, support or warranty, contact one of our Customer Support Representatives by email at [email protected], or try using the Peavey Forums.
We can be reached by phone at 877-732-8391 (toll free in the US).
$499.99 USD
WARNING: This product can expose you to chemicals, including DEHP, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Unless noted otherwise, Peavey Electronics ships all items within two days of receiving an order. You will receive notification of any delay or cancellation of your order. Most packages that ship from Peavey Electronics require a signature upon delivery so please make sure to choose a shipping address where a signature can be obtained. Orders are processed Monday through Friday.
FREE Shipping with ALL ORDERS OVER $30.00!*
Shipping Charges** Valid for Contiguous 48 States Only.
0 to $29.99 is $9.99
$30.00 or more FREE SHIPPING
**PR, AK, HI, Canada & Mexico Excluded.
Puerto Rico, Alaska, Hawaii, Canada, & Mexico
Quote Available Upon Request. Please call 877-860-5903.
*Oversized Items are subject to an extra shipping fee.
Most new, unopened items can be returned within 30 days of delivery for a full refund. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
To complete your return, we require a receipt or proof of purchase.
If a returned item is not in its original condition, is damaged or missing parts for reasons not due to our error, a partial refund may be granted.
See our full return policy for more information.
To Place an Order by Phone or for Customer Service for Your Peavey.com Order
Call 1-800-821-2279 to place an order by phone 8am to 5pm Central Time, Monday through Friday
Questions about your Peavey.com order? Call 1-800-821-2279 8am to 5pm Central Time, Monday through Friday
To contact Web Sales by email, send email to [email protected].
Customer and Technical Support
If you have questions concerning product operation, support or warranty, contact one of our Customer Support Representatives by email at [email protected], or try using the Peavey Forums. We can be reached by phone at 877-732-8391 (toll free in the US).